Ask Experts Questions for FREE Help !
Ask
    ebozeman's Avatar
    ebozeman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2011, 05:52 PM
    Bryant furnace problem
    The Bryant furnace I have is model number 376cav036075 and the blower come on but the inducer and the ignition switch don't seem to come on so the furnace in sending out cold air.. What could be the p roblem
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 15, 2011, 08:26 PM
    First the inducer motor has to start before the igniter can fire, so you need to test inducer to see if there is power available at the time of start up,, whie you are at it check and see if there is a fuse (automotive type) in the control board/circuit board,, is it good>

    Let us know what you find
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace problem [ 20 Answers ]

Hi All, I have a 5 y/o 80% eff bryant furnace. The problem I have is that my furnace Doesn't always kick on even when thew thermostat shows the temp under the Temp set. I will sometimes have to go down and turn of the blower switch on the furnace wait a couple seconds and then turn it on again....

Bryant Furnace - IGNITOR PROBLEM! Need help! [ 4 Answers ]

I have a Bryant 383KAV. When I install the bottom panel the blower runs for about 90 seconds. Once the blower runs for 90 seconds, the inducer fan will start up and then I hear the click that would typically begin the process of heating up the Ignitor. After about 7 seconds or so, I can hear/smell...

Bryant furnace plus 90i problem [ 1 Answers ]

Bryant furnace "Plus 90i" will run, flash red light a couple of times, shut down, then gear up and run again. It can do this 4-6 times over the course of several hours while heating the house up to 68 or 70 degrees from an overnight temp of 61 degrees. The service techs have checked the...

Bryant Gas Furnace Problem [ 4 Answers ]

Hi, I have a Bryant 373LAV Gas furnace that has stopped working. There are a couple of issues with the furnace and I'll try to explain what is going on. For now, the heat does not turn on. The thermostat (White-Rodgers Comfort Set II) shows 60 and the heat is set at 70. So I opened up...

View more questions Search