Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Slow leak where threaded copper connector meets Moen valve
[ 5 Answers ]
I'm installing this Moen shower head and handle, and making changes to the existing plumbing in a basement renovation. I have all the copper piping where I want it and connecting to the threaded copper connectors that attach to the brass valve housing. There are no leaks in any of my joints or...
Water heater leak (cold side only) where the nipple meets the water heater
[ 9 Answers ]
I just bought a water heater and completely installed it. When I turned on the water supply, a very very very slow drip can be observed where the cold water nipple screws into the water heater. I shut off the water, relieved the pressure and unscrewed the nipple. I then re-apply the teflon tape...
Ford 7.3 diesal oil leak on top of motor
[ 0 Answers ]
Hi Guy's , I have A 99 ford f250 with 7.3 engine cold starting is a big problem, and also have an oil leak on top of the motor that I can not find. Any suggestions would be greatly appreciated. Thank's Travis
How to fix leak amer std commer commode at top
[ 1 Answers ]
Hello - I work for a HOA community where we have a pool house w/"commercial" or tankless commodes. I have found a leak on two of the commodes (been cold but not freezing) - in any case, they are both leaking out of the large, screw on top... They flush fine - just a slow drip leak. I... View more questions Search
|