Ask Experts Questions for FREE Help !
Ask
    ConstrutMan's Avatar
    ConstrutMan Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2007, 07:13 AM
    96 Sonoma Ignition Problems
    :confused: I have a 96 GMC Sonoma that won't start. I've changed Computer, Crank Sensor, Ignition Module, Coil Paks, still won't start. Could it be Ignition Harness in steering column? Please Help?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 11, 2007, 08:07 AM
    1. Check all under-hood and under-dash fuses with a test light or multimeter.
    2. Check for codes.
    3. Check for spark.
    4. Check for fuel.

    If the above steps doesn't lead to the problem, take a multimeter and start checking for voltage at key junctures. Yes, it could be a problem with the ignition switch and harness. Normally, though, it is not.
    ConstrutMan's Avatar
    ConstrutMan Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 28, 2007, 11:49 AM
    Quote Originally Posted by ConstrutMan
    :confused: I have a 96 GMC Sonoma that won't start. I've changed Computer, Crank Sensor, Ignition Module, Coil Paks, still won't start. Could it be Ignition Harness in steering column? Please Help?
    :D Problem solved, I looked at wiring harness under the hood. There it was near the manifold, harness was lying on Exhaust. 2 wires burnt into, took wire connecters splice them togather. Fired Up!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1995 Chevy Sonoma [ 2 Answers ]

My service engine soon light is staying on, what could it be, how can I fix it My touch tone does not engage for my four wheel drive, what should I look at? Do you know if the heat is good in these trucks, mine seem very poor could there be a problem or is it just that way My Abs, stays on...

Ignition Lock [ 1 Answers ]

My furnace blinks 3 times repeatedly, it goes into what my furnace describes as "Ignition Lock" then it will restart after 3 hours, what does this mean and how can I change it? The house gets quite cold when it is in lock, and its to cold outside to have this happen.

Sonoma starting problem [ 1 Answers ]

My husbands 1994 GMC Sonoma won't start. He thought it was the starter or seloid so he bought a new one.. that wasn't it. The lights all work. He can jump to the battery with a wire and it will start. He wants to check the ignition module but can't locate it. Can you tell me where it is located on...

View more questions Search