Ask Experts Questions for FREE Help !
Ask
    dzung's Avatar
    dzung Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2011, 06:15 PM
    Replaced blower motor
    I have replaced new blower motor and capacitor but the blower still not running
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 9, 2011, 06:17 AM
    Trace the wire that feeds power to the motor,, its either a sequencer or a circuit control board,or fan relay,, we don`t know what kind of furnace you have
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xv90 blower motor doesn't. Motor is free, unit is 7 years, not t-stat. Thanks [ 2 Answers ]

I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...

Replaced blower motor, can hear relay but won't start - d&n 100U42-19 [ 1 Answers ]

Have a Trane xl90 furnace that I replaced the blower motor and capacitor , [ 0 Answers ]

, now blower won't shut off. Any ideas?"

Code 33 after blower motor replaced [ 2 Answers ]

I have a Bryant 350MAV, just replaced defective blower motor (siezed up) and now the furnace starts to produce heat and after a few minutes the burners shut off and I get a fault code 33. What do I do??

02 Accord had blower motor transistor replaced now I hear a flutter noise [ 1 Answers ]

My ac quit working on all speeds except 4 after having the hepa filter replaced. Took it back to the dealership they said it was the blower motor transistor. Just picked it up and now I hear a fluttering noise on all settings except off. Called the dealership and they say it is probably leaves in...

View more questions Search