Electrical connection for 1/6hp 115v blower motor

dzung Posts: 2, Reputation: 1

New Member

Dec 8, 2011, 03:05 PM

Electrical connection for 1/6hp 115v blower motor

I am trying to replace 1/6hp 115 volts blower motor, the new one has 2 brn wires, 1 blk, 1 red, 1 yellow and 1 blue but the old one only has 1 blue and 1 yellow which wire on the new motor do I use.

Check out some similar questions!

Trane xv90 blower motor doesn't. Motor is free, unit is 7 years, not t-stat. Thanks [ 2 Answers ]

I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...

6 lead 115v reversing motor to square d drum switch wiring diagram [ 1 Answers ]

Have an imperial electric 115v motor with 6 leads numbered 1-6. need to connect it to a square d reversing drum switch which has 6 connections.

6 lead 115v reversing motor to square d drum switch wiring diagram [ 0 Answers ]

Have an imperial electric 115v motor with 6 leads numbered 1-6. need to connect it to a square d reversing drum switch which has 6 connections.

Is there a suitable replacement for a GE motor 5KCP39PGP932AS 3/4HP 12amp 115v [ 2 Answers ]

Is there a suitable replacement for a GE motor 5KCP39PGP932AS 3/4HP 12amp 115v 1075RPM 4SPD? The only one I can find on line cost 316 dollars.

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

View more questions Search

Check out some similar questions!

Add your answer here.