 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hvac furnace problem
I have 3 furnaces with valve sv9520h8067 and board st9160b1068 . Every so often the inducer is energized, with or without thermostat on. I have tried new vavle , new board , different board st9120u122 removing thermostat, between furnace tech and honeywell tech , no one can figure out.
|
||||
Check out some similar questions!
I would be most appreciative if I could get some help with my Trane Weathertron XE 1200 outside compressor and outside fan unit that is not running at all. I have heat which I think is only due to the Emer (auxillary) heat strips coming on and the inside air handler fan is blowing heat into the...
My furnace starts to turn on and as soon as it's about to blow air, it will stop. Eventually, it begins to work properly but takes a while to get going. Any suggestions?
I have questions about our noise problem coming from our HVAC blower. We have the return and air flow going straight into the blower (about 12 inches or so of duct work between the blower and return grill): 1. What angle should I have the sheet metal baffle? It seems as if this is the best...
I am trying to hook up a 24 volt transformer to a relay does the common or the 24 volt go to the relay
I have a fairly new house 2years old , the intake -exhaust from the furnace runs through the attic , through a 3" pvc concentric , everything works fine , however there is a "tapping"noice that comes from the concetric as the pipe heats up , its fairly loud because it echoes in the exhaust pipe ,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
