 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant Forced Air Gas Furnace Leaking Water
The home my family and I recently moved into has a furnace that leaks water when it shuts off. It looks as though the water is coming from the combustion chamber. There are drains on the chamber leading to a sump pump. How can I check to see where the leak is coming from?
|
||||
Check out some similar questions!
Our gas forced hot air furnace is leaking water from underneath. A little stream runs from the area of the filter towards the floor drain. When I changed the filter last week the bottom of the cardboard filter frame was full of water. Could it be humidity or condensation being caught by the filter?...
Hi: I have a Heil Model 1002612-A Furnace (about 14 years old) that's driving me nuts! The furnace cycles are inconsisent. Furnace comes on, pilot lights but burner doesn't always ignite. Runs for 6-7 minute cycle, then shuts off. When it gets cooler, furnace will go through a complete cycle...
We have a Forced air gas furnace with a programmable thermostat. What is happening is that the furnace will turn on when the temp drops, like it is supposed to, and the fan will come on to blow the hot air, but the fan doesn't turn off. It will continue to blow even when the air is cold coming out...
Hi I have this 17 years old forced air gas fired furnace by Olsen. It has started to make humming noise when we turn it on. Does the blower motor need oiling. If anybody knows about it, please reply as how actually acess the motor to oil it or clean it. Thanks
I have a Rheem forced air gas furnace. The pilot will light manually and will run properly for a while, but it cuts off before reaching temperature and the pilot goes out. I've relit it several times, but it keeps doing the same thing. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
