Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
24v Transformer
[ 4 Answers ]
I am trying to find a good source for a 24v transformer. I am working on a project that will use a digital home thermostat to control a couple of 24v relays. I've found all of the parts but a suitable, cheap, 24v thransformer. I thought this would be the easiest part to find but it is turning...
Changing Air Filter on Carrier 58STA090 Unit
[ 1 Answers ]
Where is the air filter on a Carrier 58STA090 Gas Furnace? How often should it be changed? Can I do this myself?
Accord 2003 - Air filter screws stuck
[ 1 Answers ]
I just broke 2 phillips screwdrivers attempting to remove the air filter cover of my Accord 2003. Only one screw unlocked. Bad move, I used an impact driver on another one and lightly broke the pastic casing. It still seems usable. How do I remove these screws? Is drilling the screws off the only...
24v transformer bad
[ 3 Answers ]
My 24v transformer is bad on my gas pack heat and ac unit. I replace the transformer 2 months ago... I replaced it again yesterday. This time it went bad in 4-hours. What is shorted to blow the transformer? Also, DC is used to pull the a/c and fan relays, right? Where is the 24v ac...
Finding the 24V AC and ground for elec. Filter
[ 4 Answers ]
Hello, I want to install an electrostatic filter in my furnace. The filter's power source requires 24 V AC. The wire is split with black (for the 24 V AC) and white for the ground. I'm not experienced at all with wiring, so when I open the panel I have no idea where to connect these two... View more questions Search
|