Ask Experts Questions for FREE Help !
Ask
    mattaim's Avatar
    mattaim Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2011, 10:51 AM
    Bryant 100 h 13 furnace
    I have an old bryant furnace it was probably installed in 1976 when the house was built. A very similar issue as moneshc, it turns on and blows cold air. One thing a little different is that before it stopped blowing warm air every time I would turn it on it would start clicking for like 5 minutes before it would finally kick on. Since it is an older furnace I was hoping somebody could give me so advice.

Check out some similar questions!

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Bryant 394 HAD 060 100 furnace [ 2 Answers ]

What is the BTU rating and the efficiency of a bryant 394 HAD 060 100 furnace? Thanks.

Furnace short cycling Bryant Series SB C Model 100 393J [ 0 Answers ]

My furnace has been short cycling. Bryant upflow forced air furnace Series SB C Model 100 393J It will run for approximately 10 to 15 seconds, shut off for approximately 1 minute, run for 10 to 15 seconds, shut off for approximately 1 minute. It does this for around 7 to 9 times then...

Bryant furnace Model 100-394U won't Light Up [ 2 Answers ]

My bryant furnace model 100-394u won't light up.the gas is on,the pilot is on but it still won't light. Last year I put a new hunter thermostat and it worked all winter but this year it won't start any advise

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.