Ask Experts Questions for FREE Help !
Ask
    SherrillMK's Avatar
    SherrillMK Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 3, 2011, 08:24 PM
    Programmable Carrier thermostat went blank
    Our thermostat went blank this afternoon and it is completely unresponsive to any button pushing. Does a Carrier programmable thermostat take batteries? If so, we've lived here 6 years and never replaced the batteries. We checked the breaker box and nothing seems to be tripped. We checked the breakers on the furnace itself. We need help! It's Saturday night, it's getting cold, and my husband and I aren't very mechanically inclined.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
     
    #2

    Dec 4, 2011, 12:34 PM
    It is undoubtedly the batteries. Since you didn't specify which Carrier thermostat you have, I can only give you general guidance.

    If there is a door, open it and see if you see any batteries. If not, you may have to pop then entire thermostat off the wall. Look around the edge of the unit and see if you can see anything that looks like a latch, and open it. If not, try prying the entire thermostat gently off the wall. It should be attached to a plastic bracket that will remain on the wall.

    See the attached diagram.

    Hope this helps, hope you didn't get too cold last night.
    WallyH
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Programmable thermostat went blank [ 12 Answers ]

Our thermostat (which has been serving solely as a thermometer since the last time we used the heat in the spring) blanked out yesterday afternoon. I checked the inside temp. during the day, then last evening the face was completely blank. It is completely unresponsive to any button pushing. I...

T8600D Chronotherm IV Deluxe Programmable Thermostat-screen is blank, no heat! [ 3 Answers ]

The screen went blank on our Honeywell T8600D Chronotherm IV Deluxe Programmable Thermostat. I have pulled off the cover and the copper connectors look fine. This happened a couple weeks ago, just pressed one of the buttons and it came back on. Not this time. 20 degrees out so would like to get it...

Carrier programmable Thermostat [ 1 Answers ]

How can I modify the set points that the installer set?

Carrier programmable thermostat gone blank [ 1 Answers ]

I have a Carrier programmable thermostat that has gone blank. I have replaced the filter and reset the fuse for the furnace. It is still blank. Please what should l do next?

Carrier Programmable Thermostat [ 1 Answers ]

I have a Carrier Programmable Thermostat I would like to install but I don't have any directions. Would anyone know how to hook it up? Thanks, Toots


View more questions Search