Ask Experts Questions for FREE Help !
Ask
    mrguy55's Avatar
    mrguy55 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 3, 2011, 10:05 AM
    Whirlpool gas oven not heating properly?
    I have a whirlpool super capacity 465 gas oven. If I set the preheat at 350 the igniter glows and it takes 4 minutes to light but at the end of preheat time it it only 250 then it takes another 10 minutes to get to 350
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Dec 4, 2011, 12:30 AM
    Clean the sensor rod that proves the flame with fine sandpaper. Check for any airflow problems.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting 465 Whirlpool gas oven? [ 5 Answers ]

Hi, we have a whirlpool 465 gas stove and the oven is not lighting. The top burners light fine, the pilot is lit for the oven, but it won't work?

Whirlpool GS445LELS Gas Range oven issues [ 1 Answers ]

A few months ago the oven got overly hot while baking. I mean very hot. It never did that again, but every so often (maybe once a month) it would seem to undercook, or run cool. We never thought too much of it because we use it a lot and 98% of the time, it was fine. Today my wife stuck a...

Whirlpool gas oven not heating up? [ 7 Answers ]

Hi- We have a whirlpool gold "super capacity 465" gas range that is approximately 9 years old. About a week ago my wife noticed that the oven was not getting hot. The burners on top all work properly, so I assumed it was not an issue with the gas supply. After some online research and a déjà...

Whirlpool electric accubake oven uneven heating [ 1 Answers ]

Any ideas what could be the cause of inaccurate and uneven heating with a Whirlpool electrice accubake oven? The stove elements heat up fine and the oven works but not properly. There is a splice in the 220 line to the range. Is it possible this is causing the problems. If so how do I test?


View more questions Search