Ask Experts Questions for FREE Help !
Ask
    weekendrepair's Avatar
    weekendrepair Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2011, 04:14 PM
    Fridgedair front load washer FWT647GHS0 spin noise and banging
    Washer suddenly developed a very loud banging when the fast spin cycle cranks up. Took some clothers out and was somewhat better. Tried it empty and it develops a rhythmic thumping sound that builds as the speed increases, becomes fairly loud and rhythmic. Also it has been making soft thumping sounds for months when spin drying and was becoming a hammering sound.
    ChrisPolk's Avatar
    ChrisPolk Posts: 29, Reputation: 1
    New Member
    		  
    #2

    Dec 5, 2011, 01:16 PM
    Sounds like the drum itself it not balanced anymore. You should take precautions and have a tech look at the bearings/pulley and transmission system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Front Load Washer Clunking Noise in Spin Cycle [ 5 Answers ]

We have had a Kenmore Elite front load washer for a number of years (Model 970-38712-00). Today it started making a clunking noise when it started the high speed spin cycle (similar to putting a pair of runners in the dryer). I took off the back and spun the pulley by hand and heard a clunk...

Kenmore elite front load washer (11045966404) noise in spin cycle... [ 0 Answers ]

Noise in spin cycle...

Kenmore front load washer won't agitate/spin if load too heavy [ 2 Answers ]

My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...

Ge front load washer won't spin [ 1 Answers ]

I have a 2003 model ge front load washer. I noticed that my clothes were wet after running . I tried to restart washer and washer would not spin but will drain. Any suggestions. Could it need new motor?

View more questions Search