Check out some similar questions!
Line voltage thermostat wiring: replace single pole with double pole
[ 7 Answers ]
Greetings, Current setup: Three small rooms, each with its own 120 volt baseboard electric heat, each with a 25 year old wall mount single pole, line voltage thermostat. All 3 room heaters are on the same breaker. Current single pole thermostat connections have 3 wires: black, red and white....
From double pole to single pole thermostat -2 extra leads
[ 3 Answers ]
The double pole thermostat for the baseboard heater has a red and a black wire coming in (from the circuit panel) and a red and a black going to the heater. The new single pole only has a red LINE lead and a black LOAD lead. If I attach red to red and then black to black, I have black (from...
Intermatic T103 Pool Timer
[ 3 Answers ]
I have an Intermat T103 pool timer that was installed not long ago but the clock has never run. I'm sure the problem is that it is not wired properly because the two wires for the clock have no voltage across them. I need to know how to properly wire it.
Intermatic t103 timer hook up
[ 1 Answers ]
Hi I just installed a Intermatic T103 timer to my water heater. It doesn't seem to be working. I hooked it up two different ways and still the timer stays still. I first hooked it up as the spec. lines 1 and 3 were my line and lines 2 and 4 were my load nothing. Than I tried because it is a 220v...
Double pole or single pole thermostat for baseboard heater
[ 2 Answers ]
A more specific question here: My 240v baseboard heater says it can be wired with a single or double pole thermostat. Since 240v is already "dual pole" with two hots, do I want to stick with a double pole thermostat? Are there advantages/disadvantages to each? Thanks. View more questions Search
Add your answer here.
|