Ask Experts Questions for FREE Help !
Ask
    Albern's Avatar
    Albern Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Nov 30, 2011, 05:15 PM
    What is the circuit breaker ampere for pump?
    Hello there, I have a question on the circuit breaker for pump. The pump that I'm using is 2HP with power supply 240v and the ampere would be 6.25 am I right? What is the min circuit breaker ampere that I can use?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Nov 30, 2011, 07:44 PM
    6.25 amps sounds about right.
    You can use a 15 amp circuit for this if you want.
    Albern's Avatar
    Albern Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Nov 30, 2011, 10:48 PM
    Does the pump have initial high amp during start up? How to clarify the amp for the pump when it is running?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Dec 1, 2011, 05:00 AM
    All motors have a higher startup amperage, but circuit breakers are designed to handle this.
    The only way to clarify is to look at the plate on the motor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Circuit breaker tripping on electric well pump [ 9 Answers ]

I have an electric well pump which trips the circuit breaker. The pump does not seem to work. I can reset the breaker but it trips again after five minutes or so. Do I have a pump problem or an electrical problem?

Where would my circuit breaker be for my heat pump be. [ 4 Answers ]

It isn't with the other breakers.

Water pump circuit breaker tripping [ 0 Answers ]

We had a thunderstorm followed by power outage last night, this morning I went to use the water and it slowly went dead. I began by inspecting the pressure tank and pressure control switch, then found the outside water pump breaker was tripped, upon resetting the water was back on! But wait,...

Water Pump Circuit Breaker [ 3 Answers ]

When I was taking a shower at my cabin, my water shut off. I went to the circuit breaker and it had tripped. I could not get in back on initially. When I did turn it back on the pump still would not turn on. What happened? The pump is only 2 years old. Thanks, Zelly

Circuit breaker ampere [ 1 Answers ]

I have an existing dedicated circuit providing power to my residential well. It is a 240v circuit and has a 30 amps double breaker. I would like to install a manual transfer switch, "Emergen" (Conneticut Electric) model 10-7501 to the circuit, however they warn against connecting to any circuit...

View more questions Search