Ask Experts Questions for FREE Help !
Ask
    summerann79's Avatar
    summerann79 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2011, 02:08 PM
    Connecting water to refrigerator?
    I just got a new refrigerator however the water spigot is a male fitting and the water hose from the fridge is a male fitting. Any recommendation on how to fix this?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 29, 2011, 02:48 PM
    The valve should have a male compression thread. Is the frig end another male compression fitting? If so, get a double female compression fitting or a piece of plastic tubing with compression rings and female fittings.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a GEside by side refrigerator. Water stopped flowing from spout. Tap water bad [ 1 Answers ]

I have a GE side by side (5 yrs old) Mod #GSS22SGRE SS and the water spouts been working fine until 4 days ago. It just stopped and hasn't worked since. When I ask for ice, great, but when I ask for water, nothing. I've changed the filter cause that's what the guy at Lowe's told me it was and still...

Connecting water hose from water inlet valve to ice maker. [ 0 Answers ]

I put in a new water inlet valve but the water line from the valve to the ice maker keeps slipping out. I push it in hard and it seems tight but several days later it comes out. What is the procedure to keeping it in tight? Thanks

Hooking up water line to refrigerator for ice maker and water dispenser [ 2 Answers ]

Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...

Connecting water line to refrigerator [ 6 Answers ]

I have a GE Profile refrigerator, and the manual is very vague about how to connect the water supply line to it. There is ¼" OD copper tubing coming from the back of the fridge (about 3"), and I have the supply line (¼" OD copper tubing w/ about 48" extra coiled up) coming from the basement. How do...

View more questions Search