Ask Experts Questions for FREE Help !
Ask
    Trywait's Avatar
    Trywait Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 27, 2011, 11:14 PM
    Appliances
    The start button on my kenmore dishwasher doesn't work anymore.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Nov 29, 2011, 06:03 AM
    Check the switch with an ohm meter after cutting power to the unit. When the button is pressed the ohms should go to zero, or close to zero. If the switch is good then the problem is elsewhere and you will need the model number to get a wiring diagram. The dishwasher has safeties and other relays that can fail and prevent it from responding when you press the start button, which rarely fails. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Appliances [ 2 Answers ]

How do I get a wire diagram of Kenmore 300.110.28332700/washer? Tried the internet not doing any good. BOB, Aug

Appliances [ 1 Answers ]

I am trying to figure out a solution to my problem my kenmore washer filled up with water about an hour later I came back to unload my laundry lifted the top & my clothes were still sitting in water so all I know is that the washer filled with water & that was how it stayed

Appliances [ 0 Answers ]

Ice maker Sears Galaxy Fridge, just hooked up water line, Ice maker works fine, but No Water? What do I need to do to get it to work? Thanks))

GE Appliances [ 1 Answers ]

I have a GE top freezer refrigerator model # PTS25SHSSS I can not get the controls panel lights to come on. After reading the trouble shooting tips it refers to a possible solution as replace the fuse….but it fails to point out where the fuse is located. Their will be a $70.00 service change. ...

View more questions Search