Ask Experts Questions for FREE Help !
Ask
    BigWilly's Avatar
    BigWilly Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2011, 01:23 PM
    XB-90 Trane furnace Thermal Protection device on?
    I have a XB-90 furnace that indicates the Thermal Protection Device is on. The blower motor runs, but burners do not kick on. I have looked for reset switches to no avail. Help.

Check out some similar questions!

Thermal Protection device open on Trane Furnace? [ 1 Answers ]

Thermal Protection Device Open [ 0 Answers ]

My furnace is a Trane with a White-Rodgers 50A55-480 control module. I have been tinkering with it for over 6 months now. I have replaced the ignitor unit and also steelwooled the other unit on the other side. I used to be able to move all the wiring left and this would allow the furnace to...

Thermal protection device open [ 2 Answers ]

Getting 4 blinking lights. Furnace lights kicks on and works for like 5 minutes then shuts off but the fan keeps blowing then it repeats over and over again.

Trane furnace codes?thermal protetion device open ? [ 2 Answers ]

Code flashes 4 times, chart says thermal protection device open how do I fix this problem

Thermal protection device open? [ 0 Answers ]

I have an American Standard Freedom 80. The blower turns on when heat is called for but as the glow plug is not "lit", no gas comes through and there is no ignition = NO HEAT. I am very ignorant to the workings of furnaces and need some advice. Do I simply try to replace the glow plug? How can...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.