Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Why doesn't my kenmore elite H3 MODEL# 110.82822101 Dryer Heat up to dry the clothes?
[ 3 Answers ]
MY dryer is not heating. It runs but no heat. I have already changed the heating fuse. And once that was done I saw the heat area glow and that showed me it was working. So after I put 3 loads to dry it stop heating. What is the problem? I have a Kenmore Elite HE3 model #110.82822101.Please give...
Kenmore Elite Dryer Model #110.60936990 not getting hot
[ 2 Answers ]
I have a Kenmore Elite Dryer Model #110.60936990 and it is not heating up. When you press the start button and let go the dryer will start but then it stops right then, but if you hold the start button it will continue to run until you let the button go and it will not get hot while holding the...
Kenmore Elite HE3 Gas Dryer Model 110.92832100 runs but won't heat up
[ 0 Answers ]
Dryer was working fine yesterday. Wife went to use it today and it will run. But there is no heat coming out of it. I was going to give up trying to fix it myself, until I called Sears today for a repairman. They want $129.00 just to look at it. Parts are extra. I have never used an ohm meter...
Kenmore Elite H3 model 110 gas dryer, burnt smell
[ 1 Answers ]
I just started to run my dryer when I noticed a burnt smell coming from the laundry room. That was the only thing running (less than 10min). It doesn't seem to smell from behind the unit but it does inside. I always change lint before/after every use. Any idea's?
Kenmore 29" gas dryer Model #110.72602101 takes several cycles to dry.
[ 6 Answers ]
My 5 year old Kenmore Super Capacity gas dryer (model #110.72602101) suddenly started taking several cycles to dry a load of clothes. I checked the vent and it is not clogged. There is a plug on the front of the dryer I pulled off and watched the flame ignite and it stayed burning until the timer... View more questions Search
|