 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low Hot Water Pressure in Shower
We had a contractor completely renovate our home recently and the hot water pressure is very low in our master shower. The rest of the sinks and showers are fine, just this one is giving us trouble. I have read other questions on this site and followed the direction of the answers and I still can not get this problem solved.
I have taken off the valve behind the handle, this did not help. I took the entire shower head off so there was only the pipe sticking out and it still has low pressure, only on the hot water side. Is there anything else I can do? I would call our contractor for help but he is MIA... Thank you so much for your time. |
||||
|
||||
|
My guess would be that you have something in the hot water side of you faucet, if you know how you could cut off your water and see if you can find a blockage in the faucet. If you have someone to help you could hold something in front of the faucet while you have it apart and have them turn on the water for a couple of seconds. Be prepared for lots of water. And only a couple off seconds.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I have a serious problem in one of my bathrooms. The cold water pressure of the shower/tub is fine. But when I turned the knob towards the hot, the pressure drops all of a sudden, too low to take a hot shower. The sink 3 feet away has both excellent hot and cold water pressure. I suspect...
How does one go about increasing water pressure in a baseboard heating system?
My shower/bathtub has no water pressure. It does not matter if you turn the cold or the hot water on. The rest of the house is not having any problems with water pressure just this particular bathtub/shower. I tried removing the water spout to see if anything was stopping it up, but it won't...
I just installed anew hot water heater. I think all the plumbing is correct. I get Ok pressure on the cold side but NO pressure on the hot side. Any ideas what to look at?
I have tried every faucet in my house and they all have the same problem. When I run cold water the pressure is normal but when I turn the faucet to hot the water pressure goes way down. It still comes out and is hot but there isn't enough pressure to run a shower. Can anyone tell me why the how...
View more questions Search
|
