Ask Experts Questions for FREE Help !
Ask
    elmo2's Avatar
    elmo2 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2011, 10:16 AM
    how to wire a variable speed kit
    KB-36 speed kit napoleon 1402 insert
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 20, 2011, 11:34 AM
    Use a motor controller or a variable speed fan, They are available from Napoleon. Do not use a light dimmer as you will burn the fan motor our
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Nov 20, 2011, 11:36 AM
    Got this wrong!! You have the kit. No diagram? Have you tried the Napoleon website? How many wires and what color?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Should I get a variable speed air handler or single speed? [ 4 Answers ]

I'm looking into getting a new heating unit - I'm looking at 2 options - the single speed - standard model - and the 2 stage variable speed model- it's a little over a $1,000 difference - but I keep hearing about the variable being worth it - I have a single story home 3 bedroom - I'm adding...

A controlling variable is a motor speed that varies from 800 to 1750 rpm.If the speed [ 2 Answers ]

A controlling variable is a motor speed that varies from 800 to 1750 rpm.If the speed is controlled by a 25- to 50- v dc signal, calculate (a) the speed produced by an input of 38v, and (b) the speed calculated as a percent of span.

Can you hook up the high speed wire to the medium speed wire on blower fan [ 20 Answers ]

My blower fan has 4 wires but unit has 3 the high speed wire from blower has nowhere to go what do I do because we have very low air flow

Connecting two wires from light kit pull chain switch 2 wire to light kit for fan [ 6 Answers ]

I would like advise on how to attach the two black wires on the light kit pull chain switch to the light kit on the ceiling fan. I see there are two unattached wires on the light kit, one is black and the other is white. Are these the correct wires to attach the pull chain to? If so, how do I...

Variable Speed vs. Single Speed Blower [ 1 Answers ]

Questions: Getting 2 new heat pump systems installed. 1.5 ton upstairs and 4 ton downstairs. Decided on Comfortmaker. Heat Load calc performed on sizes. Going 2 stage with variable speed downstairs with Honeywell IQ Pro stat. Was going to go one stage with variable speed upstairs with...

View more questions Search