 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My 3 year old kemore washer is not draining at the spin cycle?
It seems it spins and drains from wash to rinse and then rinse to spin but from spin it doesn't drain so when machine stops the water is still in there. I peeked and saw it drain and spin after the wash cycle but from then on it won't drain. I think when my daughter washed her pillow that got eaten up that caused it to go off. I have moved the tub all around and moved the machine back and forth but it still will not drain at the end. Please help. Thank you
|
||||
Check out some similar questions!
I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....
I purchased a used kenmore 70 series washer model 110.24712300. When I ran it the first time at the end all the clothes were still soaked. I realized that it wasn't spinning. I set it to spin again and started it with the lid open. The machine started but still did not spin. I helped it out...
My Kenmore Elite top load washer won't go into the spin cycle. It makes kind of a small grinding noise. The washer is about 10 years old. Some have told me it's the transmission, and other said that the top dial on the washer is broken. It's draining the water, agitating for the clothes, but...
Hi, I have to slam the washer down to start it, and now it won't spin, I have had this washer for 2 years, this is a top loader, fairly new, any help would be appreciated... Debra
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
