 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heat not working
My base board was leaking I drained it and souder it next thing is I do not have heat in onne zone though I have opend all valve drained air out twice thermostate are new and I chech them too they aregooe What is the problem where I should check I mean what to do next.Pleasr tell me.
|
||||
Check out some similar questions!
The thermostat is operating/clicks on when desired temperature is more that the actual, but no action at the compressor or fan. We even switch thermostats from other unit in house and both operate the other unit correctly.
I have a goodman heat pump it will work in cooling mode but not heating. When I put in heating mode the air handler will kick on and the back up heating stripes work but the heat pump does nothing. I have replaced the transfomer on the air handler when it burned up and also replace the contactor...
Heat strip not working on my goodman heat pump
I do have heat. The fan outside is working on the heat pump. Inside unit is on. Heat Pump is set to Aux heat, with AUTO for fan. But the Aux heat is NOT what is on. The Aux light is OFF. I do NOT have it set to emergency heat, but the emergency heat light is ON. :eek: What is...
The blower is working fine on our Heating and Air Conditioning unit but neither the Air or Heat will work. The emergency Heat works fine though. The unit is a Carrier with the words American Standard written on the outside fan unit. What should I look for before calling a tech or what would this be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
