Ask Experts Questions for FREE Help !
Ask
    schessler's Avatar
    schessler Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2011, 06:09 PM
    Need to replapull chain switch, e116997 but need to know how to get the 4 wires of
    Pull chain switch, e116997 but need to know how to get the 4 wires of the old one.

Check out some similar questions!

How to wire a well tec e116997 ceiling fan switch? [ 4 Answers ]

Yes I am one of many who broke the ceiling fan switch for a casablanca fan. The switch is a well tec e116997 & the wire colors that connected to this switch were Black, yellow , green, and blue. can anyone here help in the wiring sequence?

Well Tec Switch,e116997, [ 1 Answers ]

Is there a how to assemble reference on the well tec e116997 ceiling fan swithch?

Connect ceiling fan wires to ZE268S6 pull chain switch [ 2 Answers ]

I ordered a new pull chain switch from Hunter and I want to install it myself. It's configured a bit differently than the original. The switch has 4 slots on the side like the original (Well Tec) and also 4 small round holes on the top. Can someone tell me where and how to connect the fan...

How do I connect the wires on a new pull chain switch on a ceiling fan? [ 1 Answers ]

I have a Heritage Model H42UL (05 2001) ceiling fan that had the fan switch removed before I acquired the fan. Wire colors for the switch are Black, Orange, & from the capacitor, Yellow & Purple. Which wire goes to which slot on a new switch?

Ceiling fan pull chain switch with 6 wires [ 3 Answers ]

Our ceiling fan switch clicks but the fan does not go on. When I opened the housing, I saw that there was 6 wires, 2 of which were white. One of the white wire was not connected, it could have caused the fan to stop working (?). I do not know where this white wire should be connected to as all...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.