Ask Experts Questions for FREE Help !
Ask
    JDENNY13's Avatar
    JDENNY13 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 18, 2011, 09:01 AM
    Electric trane xe80 furnace cold air?
    I have a tranex e80 electric furnace
    Model vcm 15uls
    115v-60hz
    1.0a 1 phase
    The furnace is only blowing cold air. I have tried reseting it and no luck. The error code is 22 but there is no codes listed on the furnace & do not know what the trouble code means. The system cuts on, fans blow & you can hear the system click on but still only cold air.. any suggestions?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Nov 19, 2011, 06:32 AM
    You will need to use a meter to find the problem. It could be the element, the relay for the element, a safety, or the thermostat. These furnaces are very simple; you just need a meter to do anything. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xe80 gas furnace not blowing any hot air [ 2 Answers ]

I have a Trane XE80 Gas Furnace. It is not blowing any hot air at all. Can anyone help. Thank you

Trane xv 90 Furnace only blowing cold air [ 1 Answers ]

Hi My XV 90 Trane Furnace is only blowing cold air. There is a red light flashing on the unit. Any ideas?

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. A [ 1 Answers ]

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. Any ideas on how to fix this? Does it need a delay? How do I do that? Thanks in advance, Jay

I have a trane xe80 it is blowing cold air need it to blow heat [ 1 Answers ]

Blowing cold hair flames stay on only a few seconds and shuts off meanwhile furnace blows cold air themostat is set at 70

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. A [ 0 Answers ]

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. Any ideas on how to fix this? Does it need a delay? How do I do that? Thanks in advance, Jay

View more questions Search