 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Heil N8MPN. Fires up properly. Shuts down circulating fan and burners after 15 seconds to several minutes. Draft inducer continues to run for short period, kicks out then immediately kicks back on and then unit goes back through same sequence. Honeywell valve shows proper function with heartbeat...
Heil furnace model PGF024K060A comes on fine runs to set temp kicks off heat, blower stays on but heat won't come back on until you shut down system
Have a heil 100,00 BTU furnace that is when it gets cold at night the burners will not stay burning, the electric pilot light is on but no ignition of the burners unless I shut the system down for a while. The blower stays blowing with no ignition of the ports
On initial start up on my Heil 7000 furnace it is making one heck of a noise until the blower comes on at which time everything is normal. Heater is working perfectly at that point. Do you have any ideas?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
