Replacing T26A thermostat with RTH2300B programmable

Check out some similar questions!

Replacing old honeywell thermostat with new programmable [ 3 Answers ]

Hello, I am in the process of replacing an old honeywell thermostat (Q539A1014) that was installed by a HVAC prof. about two years ago. We wanted to upgrade to a programmable thermostat. We purchased a RTH6300B Honeywell. I was told by the home improvement store this was compatible and...

Replacing Old Thermostat with programmable on 2-stage Furnace [ 9 Answers ]

I am trying to replace my old mercury thermostat with a programmable one. The furnace is a realtively newer Carrier: Performance series (Model: 58MTA) 2-stage heat. I have a few probems: 1) There are only 2 wires coming from the wall. I have a feeling that when the previous owner (I'll assume...

Replacing mechanical thermostat with programmable [ 1 Answers ]

I'm looking for help from labman or any experienced HVAC person... here goes... I recently purchased 2 Honeywell Focus Pro 6000 programmable model TH6110D1005 thermostats (I have 2 zone heating). I'm a replacing a mechanical honeywell dial mercury thermostats (Probably about 20 years old or...

How do I match wiring when replacing a programmable thermostat? [ 6 Answers ]

Had to replace the programmable thermostat. Instructions weren't clear to me as far as what jumper settings of on or off looked like. Does "on" indicate placing the plastic piece over the jumper posts? I have 5 wires, White, Yellow, Red (which was connected to RH, then had a piece of wire...

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

View more questions Search

Check out some similar questions!

Add your answer here.