 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman 92 GMN-100-4 furnace won't do anything but flash code ,suggestions needed
My furnace doesn't have a code list on it like it's suppose to. My furnace makes no noises
Like the flue/exhaust fan coming on, or even the igniter turning red. I'm clueless. The Upside is that I do get a trouble code,but don't know what it is because of no list on the Furnace. I get 3 blinks-a pause-3 blinks. Is that 3 or 33 trouble code, and what would it Mean please? I've checked for loose/broken wires and found none. Please assist in my Mass confusion. Any and all suggestions will be greatly appreciated. |
||||
Check out some similar questions!
I have a Trane Furnace. 2 years old. The Error Flash Code blinks 4 times-Open Temp Limit Switch. How do I fix this?
Anyone know how to interpret the led codes on this furnace?
Had ignitor and heat seņor replaced. My furnace is about 16 yrs. Old... It starts up normal Sometime stays on full cycle. Other times starts fires up and then flame goes out and cycle Tries again about 3 time. I then shut down the themastat. Had thermostate checked out also All by licensed...
I have a Carrier and the furnace and the heat will not come on. The fan does come on but the burners will not ignite. I get a red flash code of 2 short and one short. I have the same thermostat upstairs and I switched them and the same result. The upstairs works fine with both thermostats. I have a...
Hi, my name is mo from Arizona, my Goodman Model PGB furnace would not light. Pulled out the spark ignitor, flame sensor, ckecked voltage at gas valve, pulled out fuse, all of these parts looked and checked out OK. Turned the power on and the furnace worked fine. Remembering the LED was blinking...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
