 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane XL1200 Heat Pump - fan runs, not heating
I have a trane XL1200 heat pump, fan runs, but no heat is being fed to air handler, so AUX heat is heating right now, the compressor is not running... I am hearing it could be a condenser causing the compressor not to kick on.. any help appreciated, it has run flawlessly for me and hope I don't need to shell out 6K for a new system right now... thanks
|
||||
Check out some similar questions!
We changed our heat pump from AC to heat, noticed the inside fan ran all night. Checked in the morning and the outside fan wasn't running. Turned it off and back on there is a click but the fan doesn't start. Turned the setting back to AC to see if it would run acts the same as with heat, exterior...
Hi, my outside air conditioning units fan runs then stops then runs again; is this normal? The house seems to be cooling fine.. I never noticed this before..
I have a Trane XL1200 Heat Pump that was disconnected and reconnected due to some foundation work this past July. The contractor picked the company to do this work and the tech miss-wired the low voltage line between the Heat Pump and the Air Handler. The cooling function worked fine and we did not...
Thermostat 3AAT80B1A1 has 8 wies connected. Need to know what they are: Orange: Green: Yellow: White: Blue: Black: Tan: Red:
I added a new room on my home and am adding a 3 amp booster fan to my a/c unit that will turn on and off with the blower fan on the main unit. I can pick up a relay to be used to switch it on and off but my question is what would be the best place at the a/c unit to power on the relay from? The...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
