Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
240v lights vs 277v on energy cost?
[ 4 Answers ]
What to know how much, if any we would save on changing 240v highbay lighting to 277V. The ballast are multi tapped so we would only have to change one wire. How much would we save per light fixture.
Can I have 21 recepticals, 10 lights, 3 fans, and 3 (240v) plugs on 100 amp breaker?
[ 4 Answers ]
I just bought a 100 amp breaker panel to replace an old fuse panel. The thing is, after I figured up everything I wanted in the shop, (21 receps. 10 lights, 8 switches{4-3way switches and 4-single}, 3 fans{2 w/ lights}, and 3-(240v)plugs), I'm now not sure if I can pull all them on a 100 amp...
Wiring from 240v to 120v step lights
[ 1 Answers ]
I have one hot black wire going directly from one light to second light to 3rd, 4th, 5th, & wire twisted together in each light hole, then feeding to other ligths around the deck in conduit. Then I have one hot red wire & one nuetral white wire which connects to first light. When I connect second...
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power and 12-2 to lights
[ 1 Answers ]
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power wire source and 12-2 to between the 6 lights and then using 12-2 witing to the single pole switch?--need your help please
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|