Ask Experts Questions for FREE Help !
Ask
    fredfan's Avatar
    fredfan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 7, 2011, 02:01 PM
    Trying to change out the remote control receiver on a Hampton Bay fan
    Need to change out the receiver for the remote control--steps?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 7, 2011, 06:32 PM
    You know its located in the canopy, right? Remove the canopy, slide the receiver out sideways and disconnect all of the wires. If there is a light kit you will have an extra wire, blue.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Will a Hampton Bay Fan or HarborB remote work to replace a Hunter fan remote control? [ 1 Answers ]

I bought a used Hunter fan Model 23530 and it is missing the remote control Model 85095-01, Freq: 350Mhz, Battery 12V, Type 23A, MN-21 or equivalent. I have several Hampton Bay fan remotes that work. I also have a Harbor Breeze fan remote that I could use. They have the same functions and...

Hampton Bay Fan 9T remote receiver? [ 4 Answers ]

Hello, I have surfed and surfed with no results. I have the Hampton Bay digital ceiling fan remote and it does not work anymore. I think it is the receiver that mounts at the fan. Any ideas on where to get a new one? Thanks so much for any replies...

Hampton Bay Ceiling Fan Remote Receiver [ 12 Answers ]

Have a Northport III 52" ceiling fan and can't figure out where to place the remote receiver. The installation manual says to place it in the upper canopy, but there's not enough room and after installing I can't secure the canopy. Any ideas on what I'm doing wrong?:confused:

Hampton Bay Ceiling fan not working with Receiver/Remote [ 5 Answers ]

Hi, I bought a Hampton Bay Ceiling fan with a remote. I was able to put up the fan and it works along with the lights. When I tried installing the receiver on the fan, the fan will not work, with the remote, nor manually, as almost like no power is going to it... As soon as I remove the...

Hampton Bay Redingtom IV Ceiling fan remote receiver [ 1 Answers ]

The yellow covered remote control receiver in the fan box is simply too big to fit in the decorative mounting bracket cover. The directions mention a receiver mounting bracket, that was not there, and wouldn't have fit inside either. Anyone had to deal with this yet? Instructions attached. Jim

View more questions Search