Check out some similar questions!
Wiring light fixture to ceiling fan outlet with 2 switches
[ 7 Answers ]
I searched but couldn't find this exact question... I have replaced a ceiling fan/light with a light fixture. The ceiling fan/light was connected to a single set of black, white and red wires as well as a ground wire. The ceiling fan was controlled by switches in 2 locations. One location...
Multiple Switches Controlling One Light Fixture
[ 7 Answers ]
Hello, I have a few instances in my new home where 2 light switches control a single fixture (all in kitchen). How do I get them to sync up so that they are all all in the "off/down" position at the same time? As it is now, one switch is always in the on position and one off. Thanks!
Kitchen Light Fixture with 2 (3-Way) Switches
[ 5 Answers ]
I have a light fixture in my kitchen, which is connected by 2 sets of black/white/red wires. One set goes to a 3-way switch when you walk in the kitchen and the other goes to a 3-way switch on the other side of the room. How should the wires for the fixtured be connected together? I combined the...
Trying to connect a ceiling light fixture
[ 14 Answers ]
I just hooked-up a new light fixture but it doesn't work. Any ideas? The bulb is OK, and other lights on the circuit work. The ceiling has three wires, two of which are twisted together, which I believe is for the dimmer. The fixture has two wires; I connected one to one from the ceiling, and the...
How to connect a ceiling light fixture
[ 8 Answers ]
I just moved into a house where the seller took the kitchen light fixture. I am planning to install a new light fixture. I believe the outlet may be controlled by two different switches, and I'm not sure how to connect it. The box in the ceiling has 3 wire screws. One covers a black wire, one... View more questions Search
Add your answer here.
|