Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter fan model 27302 won't turn on after installation
[ 1 Answers ]
Im installing a hunter ceiling fan model 27302. I've followed the instructions for wiring the fan and checked it with a tester to make sure that it has power and it does. The fan or light won't turn on. For the fan to get power I have to disconnect the wire labelled common in, but even then it...
Hunter thermostat 42122
[ 1 Answers ]
I have hooked up the new Hunter thermostat replacing a Rheem 41-20804-15. The system works but the aux heat stays on the whole time the heat pump is on. Shouldn't the heat pump comressor work for a while by itself before turning on the aux heat? I did hook up the old termial (W2 and E) both to...
Hunter thermostat 42122
[ 4 Answers ]
we are trying to install a new hunter thermostat (42122). We have labeled our wires as directed except we have a brown wire that was considered x in the old thermostat. We don't know where to put the brown wire. Is it considered a common (c) wire?
When turn unit on fan won't turn and is hard to turn when unit is off fan will freewhe
[ 1 Answers ]
When my ac unit comes on the blower motor won't turn and its like its stuck. But when power is off I can turn the fan easily. Is this the motor or capacitor
Trane unit to hunter 44155C
[ 4 Answers ]
I'm trying to replace an old trane thermostat with a hunter Model 44155C. The wire colors have got me confused. There are seven coming from my trane unit wires: red, green, blue, yellow, orange, black, and white. The hunter thermostat has connections for RH, RC, G, Y/O, W/B, and Y1. Which ones... View more questions Search
|