 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
York 92 % eff. Furnace will only start & run when I fill the inducer to trap hose with water. Will run about two to three hour and then shut down on # 3 error ( pressure switch) .Please help!
My furnace lights and I hear it burn, but it stops before the temp goes beyond 66 degrees.
My gas furnace periodically goes to rollout lockout when very cold outside.I wonder if a weak sensor is my culprit.Air flow seams to be a problem at times.the rollout sensors are fine. What to do?
HVAC replaced circuit board on my york gas furnace New board has a green light that flashes continuously on/off about every 1 second When furnace is running this light changes to red and flashes at same rate Is this normal?
York furnace, thermostat calls for heat, hot surface ignitor glows, flame in burner box lights for about 1-3sec and then goes out, already replaced flame sensor, any ideas/
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
