 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installing new honeywell rth6350d1000 thermostat
Just moved to North Carolina and have a heat pump for the first time. I want to install a new programmable thermostat but I am a bit confused... The one I have on there now is a Honeywell th5220d1003 and it is wired as follows:
Wire : Terminal White : Aux Green : G Blue : O/B Yellow : Y Red : are - and has a jumper to Rc The new thermostat is a honeywell rth6350d1000, it has exactly the same mounting plate and pins. I tried to just plug it on the way it was wired and it did now work. Now sure what the heat pump is as the house is a rental and I haven't been up in the attic to look at it... however I do know it has emergency heat... Thanks! -Bill |
||||
Check out some similar questions!
Just moved to North Carolina and have a heat pump for the first time. I want to install a new programmable thermostat but I am a bit confused... The one I have on there now is a Honeywell th5220d1003 and it is wired as follows: Wire : Terminal White : Aux Green : G Blue : O/B...
Hi: Got a fixer-upper; need to install a Honeywell RTH6300 5-2 Day Programmable thermostat. I have the wires, the old unit was just yanked out of the wall. 6 wires... black/white/red/orange/green/"cream"? Problem is they are not marked. How do I determine which wire goes to which terminal...
I have a Intertherm Heating/Cooling w Heat Pump: B2BV036K-B.? Years VOLTAGE: 208/230 HZ: 60 FLA: 2.6 HP: 1/3 Heat Kit: H1HK010H-01 I am replacing an old Intertherm thermostat with a dial that had 2 mercury tube/switches with a New Honeywell RTH6350D1000: Old thermostat Pin///Wire Color///New...
I'm installing new thermostat - all wires/lettering corresponds from old to new with the exception of new one has a slot for "w"but I have two wires left "w1" and "w2". "W1" is tan and "w2" is yellow. Thanks for the help!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
