 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
ICP N8MPN Furnace troubleshooting?
I have a ICP N8MPN furnace that worked properly all of last season. This season it fires up properly with inducer blowing, pilot igniting, and burners blue and looking good. Suddenly it shuts down around the time the fan comes on. Sometimes just before and sometimes just after fan comes on. I hear a click when it shuts down, but not sure where it's coming from. Any ideas?
|
||||
Check out some similar questions!
Furnace troubleshooting
[ 3 Answers ]
How do I locate my furnace relay switch?
Furnace troubleshooting
[ 2 Answers ]
What's wrong when my furnace starts blowing hot air then stops and shoots out cold air... then when I check the thermostat the temp went down by itself...
Furnace troubleshooting
[ 0 Answers ]
I
Furnace troubleshooting
[ 1 Answers ]
I have an amana furnace about 20 years old. Model #ghi115a35. When I put the thermostate at 70 or 75, does not matter, the inducer motor comes on, the glow light is on, the gas valve will open, but will not ignite the burners. Then the gas will close, I try again, about two times, then the gas...
Who is icp
[ 6 Answers ]
Does anybody really know who icp is I would really like to know if there is anybody here who knows what a juggalo is or who icp is
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
