Ask Experts Questions for FREE Help !
Ask
    pressman721's Avatar
    pressman721 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 30, 2011, 09:00 AM
    Maytag Performance Series Dryer
    We have a 1 year old Maytag dryer that we moved from one house to another recently. The dryer worked fine at our old house but in our new house we are getting a PF error code. Everything else on the console appears to be working but I can't get the PF code to clear. I have tried unplugging it to reset it. Have tried holding down the power/cancel button and the start/pause button like the manual says but the code is still there. It is the only code that is flashing. Any suggestions on what else could be causing the code or anything else I could try?

Check out some similar questions!

Maytag Dryer Series 3000, Status Lights doing odd things. Dryer hot. [ 0 Answers ]

At first my status lights went out and I had a 7 in the error box. But the dryer still worked. I just didn't know what I was drying on. Well, now the lights are doing all sorts of things. They are all on or flashing or not on at all. Plus, the last time I used the dryer they were flashing for a bit...

Maytag Dryer Series 3000, Status Lights won't work. Any ideas? [ 0 Answers ]

My Maytag dryer will run but the status lights are off. I cannot tell what it's running in but I assume it is the normal, dry cycle. It drys the clothes. It also has what looks like a 7 in the time box. The light is still on inside the dryer. Can anyone tell me what to do? Thanks. Melodie

What is the capacity of my Kenmore 80 Series Washer & 90 Series Dryer? [ 1 Answers ]

We are trying to figure out what the capacity is of our Kenmore Washer and Dryer that we purchased over 10 years ago in Canada. I can't find it anywhere on the machine or manual. The Model # of the Kenmore 80 Series Super Capacity Plus Washer is 110.4784292, Serial #CH0802766. The model # of the...

Maytag performance icemaker [ 0 Answers ]

I have a maytag performace refrigerator model #PTB1953FR.. the icemaker will make ice if the bar is on the on position and the off position. Continuously makes ice... I'm ending up dumping the ice because it never stops.. how can I get the icemaker to stop when the bar is on the off position?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.