Ask Experts Questions for FREE Help !
Ask
    polaris_man's Avatar
    polaris_man Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 30, 2011, 07:02 AM
    Intertherm eletric furnace
    When it goes to start there is a big buzzing noise first then the blower will start..
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Oct 31, 2011, 03:31 AM
    Sounds like to contactor for the fan motor needs to be replaced.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Nordyne eletric furnace and the blower motor will not come on? [ 1 Answers ]

I have a Nordyne eletric furnace. When I turn the thermostat to cool and auto the fan unit does not come on. Every now and then you can hear a buzzing sound and if you tap on the control box the fan will start running but it stops after a few seconds. Could it be the run capacitor or the...

Eletric gas pilot furnace help [ 8 Answers ]

Im converting my lennox furnace from lp gas back to natural gas. The electronic pilot will not light.. It runs the cycle... igniter gets red hot , gas comes out but won't ignite. It will light if I put a match to it. I replaced the complete assembly but still won't light??

Coleman central eletric furnace [ 1 Answers ]

Furnace turn on blower comes on for a 60 seconds turns off and heating elements stay on took fuses out and replaced them all one of the 30 amp was burnt

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Coleman Eletric furnace Thermostat Wiring [ 1 Answers ]

I have a Coleman model 3500 electric furnace. The fan and heat/cool switchs are on the furnace. I am wanting to install a programmable thermostat and have the fan and heat/cool switches on the thermostat. There are only two wires going to the thermostat, I am going to pull out and replace these...

View more questions Search