Ask Experts Questions for FREE Help !
Ask
    Realtorgreg's Avatar
    Realtorgreg Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 29, 2011, 07:59 AM
    Tempstat 5000 won't light no spark
    I have a Tempstar 5000, A technician was here the last 2 days. Worked for an hour after her left. No heat again.Everything is working but no spark. How can I test the Igniter? Honeywell VR8204 to a control panel then out to igniter.
    Realtorgreg's Avatar
    Realtorgreg Posts: 2, Reputation: 1
    New Member
     
    #2

    Oct 29, 2011, 09:55 AM
    I do not see a way to edit my previous question. I have a Tempstar 5000.It has a S8600m module.I get an very rare weak spark from the Ignitor, never enough to fire it. If I cycle the furnace and manually light the pilot at the right time,it lights and heats,then after 5 minutes the flame goes out and blowers run.After a while I hear a change and I supply flame to the pilot and the scenario repeats.I pulled the ignitor cable and tested,it is good.I took a automotive spark plug and grounded to the chassis. 1 Time a got a week spark, then could not get it to spark again. I am guessing a module,but I want to know what else I should be looking for.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intermittent spark ignition spark but will not light pilot on natural gas furnace [ 1 Answers ]

Johnson ultra air 97 natural gas furnace , 18 years old Starting sequence 1) exhaust blower and main blower come on 2) 2 seconds later intermittent spark igniter starts sparking , but will not ignite pilot Will shut down after maybe 20 seconds , do not smell any gas Things I've tried......

My pilot won't light or even get a flame, only a spark. What is the problem? [ 1 Answers ]

I only see a small spark when I try to light the pilot on my water heater. I can't get a flame. Is that a gas problem?

Warm air furnace: no pilot light, no ignition spark [ 8 Answers ]

I have an International Comfort fan assisted warm air furnace with an issue: The unit does not heat - burners and pilot do not light. The flame blower runs when heat is commanded from the thermostat. There seems to be no gas as the pilot. There is no pilot light, and no spark when...

96 honda accord with no spark or check engine light [ 2 Answers ]

Before Teaxs grease monkey says see section a and b or k-test let me list what I have done. Checked all fuses with meter K-test , 5 volts on one side 3 on the other Code scanner , says no issues found Replaced coil Replaced main relay Replaced icm Replaced dist cap and rotor Replaced map...


View more questions Search