 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman gmp075-3 won't ignite?
I have a Goodman GMP075-3. Woke up this morning to 60 degree house. Thermostat set to 68. Clean filter, batteries in thermostat are good. Can turn FAN on and it runs, but cannot get heat to kick on. Red blinking light on board. Power to unit. Draft fan never kicks on, never see ignitor glow. Gas valve on. Have shut down entire unit and let "reset" for 5 minutes, and still nothing. Suggestions?
|
||||
Check out some similar questions!
I have a gas furnace Goodman serial GMP075-3. The fan keep running and never stop even after the termostat is set to off. Do you know what could be the problem?
the furnace is tripping on high limit , not rollout. It will initiate a call for heat. The flue fan will run the air switch will make and the ignitor will glow. The MV comes on and the furnace lights. It continues to run for appr. 2 minutes and the high limit will open. It is not a variable high...
Noob here, Goodman GMP075-3 . Vent kicks on, hear relays activate on circuit board, ignitor will not glow. Manually sucked on vent pressure switch hose to make sure diaphram is in, no results. Cut off both end of hose to ensure new tight fit with no pressure loss and reconnected, no change. Made...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
