Ask Experts Questions for FREE Help !
Ask
    trent5360's Avatar
    trent5360 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2011, 08:16 AM
    R22 evap to 410a
    Can you use a r22 evap coil with a 410a condenser if you flush the coil and lineset
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 28, 2011, 08:53 AM
    No sir,its not designed for 410a,, not big enough
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Which freon is r22 are 410a what seer is best 12 r13 [ 1 Answers ]

Which freon is best to use r22 or 410a what seer is best 12 or13

Which freon is r22 are 410a what seer is best 12 r13 [ 0 Answers ]

Which freon is r22 r 410a what seer is best 12 r13

Cleaning a system with r22 & 410a mixed [ 1 Answers ]

I reused my line set because it was in a wall. The outside condenser and a coil were replaced but the old line sets were not cleaned. There may be a mix of r22 and 410a in my new system. Can the system be flushed completely. I was going to replace the A coil and try flushing the compressor and...

My central air conditioner is a 2009 with r22 can I change it with 410a [ 1 Answers ]

My central air conditioner is a 2009 with r22 can I change it with 410a

Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c [ 1 Answers ]

Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading

View more questions Search