Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Getting intermittent flame stoppage with Open High Limit Device error
[ 1 Answers ]
I am getting intermittant flame stoppage after furnace runs sometimes days sometimes hours with error Open High Limit Device. This is a Trane TDE080A945K2 about 11 years old. I get continuity on the HLI to HLO circuit. I replaced flame sensor and hot surface ignitor, and filter. When the flame...
Home incoming water stoppage
[ 3 Answers ]
We have lost fresh water incoming pressure in our old house... Is it possible to blow air pressure at the meter connection to blow open any obstruction that has clogged our old iron pipes... or run a snake wire into the line to clear a blockage?? tks
Sudden stoppage of mensuration cycle
[ 1 Answers ]
My wife is 49 years old. She have had her monthly cycles regularly and never have had any irregularity until eight months ago. She missed her one cycle but had her normal cycle the following month. Then she missed her cycles for three months. She saw her gynecologist who told her after blood tests...
Spontaneous drain stoppage
[ 9 Answers ]
I have a problem and need advice. I was doing laundry this afternoon when I heard running water. I went to where my washer was and there was water overflowing from the drain tub onto the floor. I lifted the washer lid to stop the water draining into the tub. There was nothing in the tub that...
Clothes washer overflow/stoppage
[ 5 Answers ]
I ran a load of clothes and my Kenmore (1 yr old) washer overflowed from the standpipe. I had this problem last summer and had two plumbers "fix" the problem until now. Plumber #1 elevated the drain pipe to provide more vertical drop and increased the length of the stand pipe. He also tried to jet... View more questions Search
|