Check out some similar questions!
How to install slop sink in basement
[ 0 Answers ]
I have a slop sink in the basement tied into a 4" stack through a cleanout with a nice fiting and 1.5" PVC to a P trap and to the sink. There is no other drains in the basement, two other stacks that are not near by and I know I am suppose to have a vent but the sink works great. How could I vent...
How do I install a vent on basement slop sink?
[ 11 Answers ]
I have to replace a very old slop sink in basement. It has 1 1/2" Galv pipe for drain, but it isn't vented. I am changing because my washer drains to it and has over flowed a few times,but always flows poorly. There is no clop in line,as I have snaked,but didn't help. I will be using solid PVC. If...
Slop sink trap/venting?
[ 2 Answers ]
I am about to replace the old 40 yr Galv drain piping on my slop sink because of very slow draining. My washing machine drains in to it. I want to install solid PVC 1 1/2". It has a saddle on the 4" cast iron sewer, past the main 3" stack.and is 1 1/2" Galv. Do I need a trap on sink? even though I...
How to replace a slop sink
[ 7 Answers ]
I have 1910 colonial house with a washing machine draining into a slop sink. The slop sink periodically gets things left in it by my kids and overflows. I know the easy answer but if you have kids, you know that this can be harder than the plumbing change. Can I replace the slop sink into a...
Slop Sink Drainage Leaking
[ 7 Answers ]
The water release for my washing machine drains into my slop sink. This set-up is in the basement of my house which has a cement floor. Whenever we do a load of laundrey and the water drains into the slop sink I have noticed that a small amount of water is starting to come up through a crack in... View more questions Search
Add your answer here.
|