Check out some similar questions!
2-cycle oil / gas ratio
[ 9 Answers ]
Hi, I'm looking for a way to consolidate gas tanks. I have three different machines that of course all use a different ratio. Auger is 24:1, snowblower is 50:1, and weedeater is 40:1. Is there a product out there which would allow me to use 1 or 2 tanks for these... I'd appreciate any input ...
Gas/oil mixture for 2 cycle engines
[ 2 Answers ]
I mixed what I thought was the correct gas/oil ratio (40 - 1) for a Weed Eater GTI 17T trimmer. The trimmer had some correct fuel mixture in the fuel system started worked until the new mixture was introduced. How can I determine if I correctly mixed the fuel? How do I clean out the mixture that's...
Gas furnace Cycle Blows but no Flame
[ 4 Answers ]
We have a Comfortmaker Furnace that is about 3 years old. It will act like it is going to turn on with the blower moter kicking on but the flame never turns on. Then the motor stops. Then about a minute later it repeats the cycle. It will do this for about 5-7 minutes several times a day. ...
Gas furnace heating cycle
[ 3 Answers ]
I have a 10 yr. old mobile home with a butane furnace. The furnace lights fine. When the burner lights and burns, the blower will come on but won't run a full cycle. It runs and shuts off, then back on and off instead of coming on and running a cycle until thermostat kicks it off. I've put 3...
Gas mixture 2 cycle
[ 1 Answers ]
Was just given a 2 cycle snow thrower with a 50.1 gas mixture ratio. How much oil for 2 gals of gas is required? View more questions Search
Add your answer here.
|