Kenmore washer won't drain on rinse cycle?

jimdandyy Posts: 1, Reputation: 1

New Member

Oct 20, 2011, 11:29 AM

Kenmore washer won't drain on rinse cycle?

Kenmore w/d stackable model #88732792 won't drain on rinse cycle all the time, just occasionally. I will then rerun the rinse cycle and it will work sometimes. Is this the lid switch?

Check out some similar questions!

Kenmore washer 110.25842400 will not finish the rinse cycle [ 15 Answers ]

My 80 series kenmore washer model number 110.25842400 will fill and wash and start a rinse cycle then stop mid rinse cycle and not continue from there. I have replaced the lid switch which did break while trying to figure out the problem. The washer is still stopping mid rinse cycle and not...

Washer won't drain in rinse cycle [ 0 Answers ]

Kenmore Washer Won't Fill on Rinse Cycle [ 2 Answers ]

Everything else is working fine, it fills normal on wash, but not rinse, no matter what cycle such as perm press, ultraclean.

Kenmore washer trouble, Stopping at Rinse/Spin Cycle [ 25 Answers ]

We have a Kenmore 80 series washer model number 110.26862503. It is just over one year old and the wife has had an issue the last month or so. It started that the cold water stopped filling. So I just switched the hoses and went off to buy the inlet valve assembly. I have not had the time to...

Maytag washer: drain pipe overflows during rinse cycle HELP! [ 2 Answers ]

:eek: I have a new Maytag washer. (top load). During the drain cycle I hear the water pumping out but then the water comes back and will overflow at the top of the pipe and on the floor. The old washer did not have this problem. We used a snake, draino etc etc. in the pipe. Sometimes it will NOT...

View more questions Search

Check out some similar questions!

Add your answer here.