Ask Experts Questions for FREE Help !
Ask
    lewismonsigna's Avatar
    lewismonsigna Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2011, 11:55 AM
    My light sensor keep blowing when power?
    I have three outside lights (40w lamps in each) and they are controlled by an external 'PIR' they work fine until we have a power-cut. This seems to blow the 'PIR' and I've replaced it already, now its happened again? Would this be a 'surge' if so how do I correct it? Its getting expensive now, cheers.

Check out some similar questions!

My 220 watt mackie power supply kept on blowing fuses were you plug in the power cord [ 2 Answers ]

My 220 watt mackie power supply kept on blowing fuses were you plug in the power cord.

Hp p.c. Power light on back blinking and power buttom not responding at all [ 1 Answers ]

I unpluged p.c. during a storm and when I pluged it back the power button would not respond? And the power indicator light on the back of p.c. is now blinking? Slowly when unpluged, and faster when I plug in the power cord??

How do I adjust the light on my Hampton bay motion sensor light (P5993-50? [ 0 Answers ]

How do I adjust the light on my Hampton bay tiffany collection one-light motion sensor fixture (p5993-50)? Also, where can I get an owner's manual for this light?

I have an outside light with a light sensor that is not working... [ 1 Answers ]

I have an outside light with a light sensor that is not working... There are 3 wires coming out of the side of the light socket to it red/blk/wht I have cut them and removed the sensor I thought I could tape off these 3 wires... Do I need to ground the black and tape the white and red...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.