 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Getting codes P1122, P0700 and P0730 on a '97 Honda Civic
After a reconditioned engine was installed on my '97 civic, the Automatic transmission started acting up. Shifting delays/ takes too long to shift.
The engine light came ON, the OBD II scanner read code P1122=(TPS issue). So the mechanic got the TPS. Before replacing it, the scanner read P0700=(transmission control system malfunction) and P0730=(Gear ration incorrect). So we didn't replace the throttle sensor. Now, I got 2 new codes. At this point, what? AFT pressure/ Solenoid problem? No need to replace transmission? flusing needed? |
||||
Check out some similar questions!
Read diagnostic codes for honda civic?
[ 2 Answers ]
How do you read diagnostic flashing codes for honda civic 92-95?:confused:
Honda civic won't start but no error codes
[ 2 Answers ]
91 honda civic won't start but there are no error codes. It cranks and puffs, but no start. Started intermitenly running like crap over the summer. Would act like it was missing, then it would run fine for a time, then run like crap again. Would also not start on occasion after running it then...
How to clear codes on 94 honda civic ex
[ 1 Answers ]
Please tell me how to clear codes on 1994 honda civic ex
Honda Civic '97 - Error Codes?
[ 3 Answers ]
So I've read through the FAQ and all of that, but I do not see any spot to read error codes as was listed in the FAQ, which I assume was meant for the 88-91's. Anyway, my car was dead yesterday, low power/didn't turn over. Took my battery to Sears, the battery is good, which leads me to believe it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
