[kmahcs]

I have a winners only rolltop desk and I am moving this heavy thing. Does anyone know how to remove the drawers to make this desk lighter. Thanks for your help.

[Independent2]

To remove the drawers, first extend the drawer open to its full length. On both sides near the front of the drawer there is a black plastic keeper that must be pinched near the top. It acts much like a barb on a fish hook. While pinching one side, lift the drawer slightly to disconnect it from the glide rail. Repeat that process for the opposidte side. When both sides are disconnected, just pull the drawer off the rails while pulling towards you. To reinstall, be certain to slip the drawer rail, which is still attached to the drawer into the a metal keeper located toward the top rear of the Accuride system. Upon slipping the drawer rail into this very small keeper on the Accuride system, lower the front of the drawer while lining up the black plastic lock with a slot in the drawer rail. Hope this helps enough to get you started. A little practice before total removal of the drawer will give you conficence. Use a flash light if necessary to see the metal keeper in the back.