Ask Experts Questions for FREE Help !
Ask
    Clowther13's Avatar
    Clowther13 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 13, 2011, 09:55 AM
    Changing a pull switch in side of a ceiling fan light fixture
    I am trying to reconnect but when disassembling one of the wires disconnected and can't figure where to put it know. Coming out of the ceiling fan I have just a blue hot wire and nothing else on the light fixture there are 3 white wires and 3 black wires on the switch there is 2 black wires. Please tell me how to reconnect this fan light

Check out some similar questions!

Changing ceiling fan to regular light fixture. Wiring question. [ 1 Answers ]

I am switching out my ceiling fan for a simple light fixture which is in the center of my room. I read your other post about the Black, White and Red wires. My new light fixture only has 2 black wires and a ground. Ceiling box has the Black, White and Red. If I only have 2 black wires on the new...

How do I remove old pull chain light fixture from ceiling fan [ 3 Answers ]

I have a Gulf Coast Ceiling Fan with a low profile light fixture. It has 2 separate pull chains. One for the fan and one for the light. The light pull chain is the problem. It is not turning off the light by the chain. The wall switch turns off both the fan and the light. This tells me it's the...

Changing a light fixture on ceiling fan [ 3 Answers ]

I have a Hampton Bay 52" Huntington fan with attached 4 light light kit- I purchased a Hampton Bay single light/bowl type replacement kit- can't figure out how to wire it together- old assembly has a nine pin connector- new light has two wires- any suggestions- have callled Home Depot and they...

Ceiling fan on/off light pull switch [ 10 Answers ]

I even have pics for you! ;) Dh managed to break the light switch pull chain on our ceiling fan. I took the light kit apart, looked up the part at the manufacturer's website, ordered the part and now that it is here I can't figure out how to replace it. Dh has worked as a fiber optic cable...

Ceiling fan light pull switch [ 4 Answers ]

Hello, I read some other posts on the subject and got more confused because of the reference to "Connect 1" and Connect "L", my wires apparently are not marked. This is my situation: I have three lights connected to the bottom of the fan (maker unknown), The lights will not turn off by...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.