Ask Experts Questions for FREE Help !
Ask
    AngelGood's Avatar
    AngelGood Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 11, 2011, 11:32 AM
    I have these codes showing up on 2001 Sonata.
    D0446(Evap control), D0320(Engine speed input), D0115(Eng Temp circuit), P1191(Limp Home Valve system fault) and P1193(Limp Home Valve low RPM). I am a women in distress, please help me understand what I can fix to get the car ready to pass inspection. Thanks so much.

Check out some similar questions!

Why won't my 2001 hyundai sonata start [ 1 Answers ]

I've replaced the crankshaft sensor, the timing belt, the coil pack, the spark plugs, and the brain and it still won't start. The fuel line is getting fuel. So I'm running out of options if any one knows I could use the help it only has 143,000 miles on it. If you need any other information let me...

2001 Hyundai Sonata won't start [ 7 Answers ]

Hi, I'm having a problem with my 2001 Hyundai Sonata. It seemed like the motor would lose power and slow down. Then the power would come back and the car would quickly speed up. It has also been having a hard time starting. Sometimes I would have to try several times before it would start. I...

Where is the fuse link on a 2001 hyundai sonata [ 0 Answers ]

I have removed and checked the starter and the alternator. Both are supposed to be good still. I also removed the battery and they said it was low. They recharged it and I replaced it. It immediately went low. The guy checked and said the alternator was not working, although it was...

2001 Hyundai Sonata that won't start [ 4 Answers ]

Hi everyone, What a great site! My question is this. My wife drives a 2001 Hyundai Sonata with about 86,000 miles. I've never had this problem with the car before and of course it is sitting in our garage. She went out to start it this morning. It turns over easily, but will not start or...

2001 4 cylinder hyundai sonata [ 2 Answers ]

Facing the engine from the front bumper what is the order by number of the cylinders and what is the firing order. I am getting a "misfire on cylinder 3" code. Thank you


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.