 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Glacier bay single handle tub and shower faucet
Hi I installed a single handle glacier bay shower and tub faucet and when I turn it on all the way to hot it runs fine but when I turn it down to adjust the temp there is a rapping or knocking sound coming out of the valve. And it is also hard to regulate the temp it gets cool and I turn it up a little bit and it becomes scolding hot then I turn it down just a hair and it get cool again.
Any suggestions on what is wrong? |
||||
|
||||
|
Sounds like you might have dislodged some mineral build up in the pipe walls when you installed then valkve.
Try this! Shut then water off, open up the valve and remove the cartridge. Check the cartridge inlet ports for trash and debris. Now turn the water back on to flush out the supplies and open valve body. Reassemble and test. Better now? Let me know, Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How do you dissassemble and where do you get repair parts. It leaks from behind the knob into the tub and behind, dripping onto lower level concrete (tri-level house).
This morning I noticed something strange with the faucet in my tub. It is a single handle tub shower faucet made by Moen. Rather then starting with the handle down in the off position and turning anti-clockwise to turn on, I need to turn it clockwise to turn on and anti-clockwise to turn off with...
No cold water on glacierbay faucet but the hot is working. Hot and cold water mixter three handle faucet. One handle is on and off ,one tub or shower and one mixing the hot and cold water. I do not have the model number.
. It has a steady stream of water coming out when I connected the water lines. The flow increases when you turn on the faucet. I have looked at the seats and valves... all are clean and in good shape. I would like to know if someone has some info for me. It will not shut off completely. I am trying...
View more questions Search
|
